ARDITEX CL PLUS+ is a two part levelling and smoothing compound with excellent flow and application properties. It’s moisture tolerant and suitable for use under a DPM. For levelling and smoothing internal subfloors such as concrete, cement/sand screeds, bitumen, adhesive residues and ceramic tiles. ARDITEX CL PLUS+ is fibre reinforced for extra strength and flexibility.
- Apply direct to most substrates without priming, including old adhesive residues and bitumen, ARDEX Damp Proof Membranes and ceramic tiles
- Unaffected by moisture and can be used direct to damp concrete
- Walk on after 2 hours and install floorcoverings in as little as 8 hours
- Can be used on heated screeds
Coverage: Approximately 4m2 at 3mm thick per unit.
Download the latest datasheets and certificates here:
- ARDITEX CL Plus + Technical Data Sheet (TDS)
- ARDITEX CL Plus + Health & Safety Data Sheet (SDS - Powder)
- ARDITEX CL Plus + Health & Safety Data Sheet (SDS - Latex)
- ARDITEX CL Plus + Declaration of Performance (CE)
- ARDITEX CL Plus + Declaration of Performance (CA)
- ARDITEX CL Plus + Environmental Product Declaration
Compressive Strength
Greater than 16N/mm² at 28 days
Tensile Bedding Strength
Flexural Strength Greater than 7N/mm² at 28 days
Suitable for underfloor heating
Yes
0
0
Was this article helpful?
0 out of 0 found this helpful