How do I tile to uncoupling membranes?

After installing uncoupling membranes with ARDEX AF 200 PLUS, they can be tiled immediately using an appropriate ARDEX Cement-Based Tile Adhesive.

Uncoupling membranes with cavities can be pre-filled to produce a flat surface ideal for tiling. For this application, smooth over the uncoupling matting with ARDITEX NA up to the top of the cavities using a smoothing trowel. ARDITEX NA can be applied thicker if additional levelling is required, but along with the subsequent tile adhesive application, the depth should not exceed 10mm.ARDITEX NA will dry in as little as 3 hours and can then be tiled as normal using an appropriate ARDEX Cement-Based Tile Adhesive.