ARDEX A 35 MIX is a pre-blended mix of ARDEX A 35 cement and graded sands to produce ultra-rapid drying floor screeds which can be walked on after just 3 hours and floorcoverings installed in as little as 4 hours, regardless of thickness. Use ARDEX A 35 MIX for bonded, unbonded and floating screeds in internal locations.
- Pre-blended with graded sand for convenience – just add water
- Walk on after 3 hours
- Receives ceramic and natural stone tiles directly after only 24 hours
- Install carpet, wood and vinyl floorcoverings after 24 hours
- Passes BRE Screed (ISCR) Testing after 6 hours
- After just one day, achieves the acceptable minimum compressive and tensile bending strengths attained by an ordinary cement screed after 28 days
Unit Size Available: 25kg
Coverage: Approximately 0.5m2 at 25mm thick per 25kg unit
Download the latest datasheets and certificates here;
ARDEX A35 Mix Technical Datasheet (TDS)
ARDEX A35 Mix Health & Safety Datasheets (SDS)
ARDEX A35 Mix Declaration of Performance (DOP)
ARDEX A35 Mix Environmental Product Declaration (EPD)
ARDEX A35 Mix EMICODE Certificate
Working time at 20°C
approx. 60 minutes
Walkability at 20°C
approx. 3 hours
COMPRESSIVE STRENGTH
After 1 day 25.0 N/mm²
After 3 days 32.0 N/mm²
After 28 days 40.0 N/mm²
TENSILE BENDING STRENGTH
After 1 day 5.0 N/mm²
After 3 days 6.0 N/mm²
After 28 days 7.0 N/mm²
SOUNDNESS (BRE SCREED TEST)
Normally after 6 hours
MOISTURE TESTING
The Speedy Moisture Tester (Carbide Method) must be used to test moisture. Please consult ARDEX Technical Services for further advice.
BRITISH STANDARDS CODES OF PRACTICE
BS 8204: Part 1.
In-situ Floorings – Bases and Screeds
BS 5385: Part 3.
Appendix C. Ceramic Floor Tiling and Mosaics
BS 8000: Part 9.
Code of Practice for cement/sand floor screeds and concrete floor toppings (Workmanship on building sites).
Embodied carbon
(A1-A3 production stage as defined in BS EN 15804)
0.96 kg CO₂ eq/kg