ARDEX AF 200 PLUS minimises the time required to install uncoupling matting to timber, concrete and sand/cement screed subfloors, allowing tiling to commence immediately after the matting is laid. Unlike traditional powder adhesives, it has a high initial grab that prevents matting from curling for easy installation, is ready mixed and comes in a resealable container.
- Fix fleece-backed matting to timber, concrete and cement/sand screed subfloors without priming
- Matting can be fixed after 5-10 minutes or, due to its long tack time, up to an hour after application
- High grab formulation prevents curling of the mat for easy installation
- Once matting is installed, ARDITEX NA Ultra Rapid Setting Latex Levelling Compound or ARDEX Tile Adhesives can be applied immediately
- Cost-effective with up to 45m2 coverage from a single tub
- Ready mixed and resealable
- Suitable for floor applications
- Suitable for internal areas
- Suitable for use with underfloor heating
- Awarded EC1 PLUS EMICODE label for achieving low emission limits
Unit Size Available: 14kg & 6kg
Download the latest datasheets and certificates here;
ARDEX AF200 Plus Technical Datasheet (TDS)
ARDEX AF200 Plus Health & Safety Datasheet (SDS)
ARDEX AF200 Plus Declaration of Performance (DOP)
ARDEX AF200 Plus Sustainability Datasheet
ARDEX AF200 Plus Environmental Product Declaration (EPD)
ARDEX AF200 Plus EMICODE Certificate
Suitable for External Use or Wet Areas
No
Suitable for Use with Under Tile Heating
Yes
Fix Matting Time
5-10 minutes, or within 1 hour
Coverage
Approximately 45m2 per 14kg tub using a B1 or 2mm x 6mm v-notch trowel