20 results for "Coarse Aggregate"
Coarse Aggregate
applications are required ARDEX FINE AGGREGATE is a dry, pre-packed 1 to 1.5mm fine aggregate used for fully blinding ARDEX R
Fine Aggregate
applications are required ARDEX FINE AGGREGATE is a dry, pre-packed 1 to 1.5mm fine aggregate used for fully blinding ARDEX R
ARDITEX NA®
7m² 3mm = 5m² 5mm = 3m² 8mm* with ARDEX Aggregate = 3m² 10mm* with ARDEX Aggregate = 2.3m² *For application thicknesses
I need to level an anhydrite/gypsum-based screed. Do I need a special levelling compound?
sand blind immediately with ARDEX Fine Aggregate. Once cured remove any excess aggregate and apply any ARDEX DPM 1 C, prior to
S21
Applications over 10mm can be achieved with the inclusion of coarse sharp sand, refer to the ARDEX S 21 Technical Datasheet for
How do I level calcium sulphate screeds?
sand blind immediately with ARDEX Fine Aggregate. Once cured remove any excess aggregate and apply any ARDEX DPM 1 C, prior to
How do I prepare a new power floated concrete floor?
blasting, to expose a sound and clean surface with the aggregate within the concrete exposed.
How do I prepare a concrete base before tiling a patio area?
mechanised equipment to remove any contamination and reveal the aggregate underneath. It should then be levelled with a suitable external
K 15
working time Apply from feather edge up to 35mm thick (3mm aggregate needed from 10mm upwards) Strong – high compressive strength
SD-T B
Subfloor Pre-Levelling Base Mix, pre-blended with graded aggregate to give significant cost savings on floors that require