Can Feather Finish be used over adhesive residue?
Yes, in domestic areas only, however it may be easier and more cost effe...
Can ARDEX products be used over a magnesite floor?
Magnesite was used a lot on older floors, and because it's moisture sens...
How do I identify an anhydrite screed?
Anhydrite screeds tend to have a smoother finish when compared to tradit...
How do I level a chipboard floor?
The British Standard for flooring - BS 8203 - specifies that all timber ...
How do I prepare a new power floated concrete floor?
The surface should be mechanically prepared by abrasive techniques, such...
I’ve removed some old ceramic tiles and the floor is covered in old tile adhesive, what should I do?
Ensure any old adhesive is sound and that the floor is free from dust pr...
I’m refurbishing a 1960s house with Marley Thermoplastic tiles on the floor, what should I do?
In domestic locations, ARDITEX NA can be applied directly as a nominal 2...
I’m replacing parquet flooring with LVT but when removing the parquet it’s leaving black, bitumen adhesive behind, what should I do?
Any remaining adhesive residues must be checked to ensure that they are ...
I’m refurbishing an older domestic property with no structural DPM. I’ve removed the old floorcovering but a thin bitumen adhesive residue remains, what should I do?
Any remaining adhesive residues must be checked to ensure they are not w...
I’m working on a 1960s property with thin vinyl floor tiles bonded to concrete with bitumen, can we leave the existing tiles and bitumen in situ as we have been advised they may contain traces of asbestos?
Some older vinyl tiles and mastics may contain asbestos. Please refer to...