63 results for "calcium screed"
How do I level calcium sulphate screeds?
For calcium sulphate screeds that are measured and deemed as dry, below 75% RH, simply follow these simple preparation steps
How do I tile to anhydrite screeds?
or calcium sulphate) screed, you must first ensure it is dry. They generally dry at a rate of 1 day per mm of screed thickness
I need to level an anhydrite/gypsum-based screed. Do I need a special levelling compound?
information please refer to our guidance note here. For calcium sulphate screeds that are measured and deemed as dry, below 75% RH
How do I stick uncoupling mats to anhydrite screeds and gypsum floorboards?
an uncoupling mat to an anhydrite (or gypsum or calcium sulphate) screed, you must first ensure it is dry and suitably prepared;
A70 Gypflo
ARDEX A 70 GYPFLO is a quick drying, flowable Calcium Sulphate screed that is specially formulated to receive floorcoverings
P51
prefabricated concrete floors, dense cement screeds, improved calcium sulfate screeds, terrazzo etc) 1 part ARDEX P 51 with ½
Can I use ARDEX smoothing compounds over Black Jack?
40mm, or an unbonded calcium sulphate screed, A70 at 30/40mm. With all of these unbonded systems the screed mortar does not adhere
How do I tile to heated sand and cement screeds?
hours to allow the screed to cool down to room temperature. If site conditions are cool, maintain the screed and room temperature
How do I identify an anhydrite screed?
Anhydrite screeds tend to have a smoother finish when compared to traditional screeds and they are commonly white/off-white
How do I level over sand and cement screeds and concrete?
cement screeds and concrete, prime with single coat of ARDEX P 51 diluted 1:3 with water for sand and cement screeds or 1:2