56 results for "screed accelerator"
KNOPP CONTOPP Ultimate 4
architects and specifiers with a reliable solution for accelerated screed installations. This innovative product addresses the
How do I tile to anhydrite screeds?
deep screed requires 40 days to dry and a 50mm deep screed requires 60 days. To be sure it is dry, test the screed with a
How do I level calcium sulphate screeds?
However, some screed manufacturers will specify that an epoxy-based primer is used so please check with the screed manufacturer
How do I stick uncoupling mats to anhydrite screeds and gypsum floorboards?
How do I tile to anhydrite screeds? FAQ for further guidance. In the case of both anhydrite screeds and gypsum floorboards,
How do I level over sand and cement screeds and concrete?
cement screeds and concrete, prime with single coat of ARDEX P 51 diluted 1:3 with water for sand and cement screeds or 1:2
How do I tile to heated sand and cement screeds?
hours to allow the screed to cool down to room temperature. If site conditions are cool, maintain the screed and room temperature
How do I identify an anhydrite screed?
Anhydrite screeds tend to have a smoother finish when compared to traditional screeds and they are commonly white/off-white
How to repair a hole in sand and cement screed with ARDEX A 38 MIX
If you're looking to repair a hole in sand and cement screed, ARDEX A 38 MIX is easy to use, and dries pretty fast too. Just
I need to level an anhydrite/gypsum-based screed. Do I need a special levelling compound?
However, some screed manufacturers will specify that an epoxy-based primer is used so please check with the screed manufacturer
Floor Screed Case Study - ARDEX A 29 at Coalville Leisure Centre, Leicestershire
Midlands Floor Screeding demonstrate the versatility of ARDEX A 29 Rapid Drying Floor Screed Cement at the new £22.5m Coalville